Forum Discussion
guitarman023
Aug 18, 2014Explorer
Finally got new rubber on the camper. Found that I towed the camper home with only the hubcap holding the lug nuts on. Just glad I made it. Wheel studs were shot, but it was a good chance to re-grease the bearings and check the status of the brakes. I also cleaned up the padding for the beds and table. I'll eventually reupholster them, as the white vinyl was done poorly but the camper is ready to pull. The interior lights quit working when I re-wired the tow lights, but I'm researching that now.








About DIY Maintenance
RV projects you can tackle on your own with a few friendly pointers.4,395 PostsLatest Activity: Oct 12, 2025