3M is Broke!
And it's my fault. I called and asked if I should use Super 77 or 90 to bond sheet fiberglass on a camper to wood, specifically underlayment/luan. Then..I asked..What is the cure time and at what t...
Forum Discussion
For fastening systems, I'd look to the Marine industry as they make a lot of hardware for marine environments.
I primarily use contact adhesives for countertops and machine tables. We dispense it by brush rather than spray. A vacuum table is the shiz for a guy that is gluing a lot of surface on a continual basis. The vacuum puts a lot of force on the surfaces and does away with weighting and clamping. You can make a vacuum bag with plastic and a vacuum cleaner if you have the need.
I primarily use contact adhesives for countertops and machine tables. We dispense it by brush rather than spray. A vacuum table is the shiz for a guy that is gluing a lot of surface on a continual basis. The vacuum puts a lot of force on the surfaces and does away with weighting and clamping. You can make a vacuum bag with plastic and a vacuum cleaner if you have the need.
