5-2 Day Programmable Honeywell Thermostat Upgrade

Awesome writeup and thanks for sharing. I've got the same stat in my 2014 FR Windjammer and will be looking to do this mod in the future.

Ron3rd wrote:
Awesome writeup and thanks for sharing. I've got the same stat in my 2014 FR Windjammer and will be looking to do this mod in the future.

You're welcome. There were a few glitches in the narrative since I created to initial post, but these have now been corrected.

Just in case anyone was wondering what I was going to do about the 3rd screw - that wall will be covered with Smart Tile so the hole will disappear. ;)

I did the same mod a few years ago. I was afraid someone (me) might bump into the switch so I used a slide switch on the side.

I do love that slide switch. Maybe one of these days I will change the switch to one like that. Looks much better. Low priority though, since it is just the wife and I and the only thing that is in front of the thermostat is the dish drainer.

How do you find the thermostat's function?

Works really nice. Holds the set temp much better than the original. Since we keep it on the cool side at night it's nice to have it kick on and warm things up before we get up.

I just upgrade my Flagstaff with a Hunter 7 Day programmable thermostat. It works great.

Did the Honeywell mod a while back. The only issues have been when the TT was in storage at extreme temps (below 50f or above 110f). The thermostat would read EE as it did not recognize the extreme temp. I had to manually jump the terminals to get heat/ac to run. Once within the range, it worked great at keeping the temp +/- 1 degree.

Playtime II wrote:
Did the Honeywell mod a while back. The only issues have been when the TT was in storage at extreme temps (below 50f or above 110f). The thermostat would read EE as it did not recognize the extreme temp. I had to manually jump the terminals to get heat/ac to run. Once within the range, it worked great at keeping the temp +/- 1 degree.

Thanks. What do you mean by "jump the terminals", ie how do you do this?

I installed the Honeywell thermostat in my pop-up (heat only). I chose the simpler 7-day version; whether weekday or weekend it's still playtime when using the camper! Nothing better than knowing the furnace will bring the temperature up before I have to get out of bed! One feature I like with the Honeywell is that the low set point is 45 degrees. Really saves on propane and battery.

On the Honeywell mod, remove the faceplate and then jump the 12v(+)terminal to the AC (or Heat)terminal Thus bypassing the thermostat's thermometer until the interior gets within the operating temp of the thermostat.

A 3" piece of 18ga works fine.

You can always buy a RV themostat and avoid all of this.