A tool to clean the holding tank
Anyone with a gizmo to go from toilet to holding tank that works we'll scrubbing. Or from the sewer dump line to the holding tank Thanks
Forum Discussion
SAR Tracker wrote:
I use a 3' piece of pvc, with a 90 and a cap at the end. Then I drilled several (5?) small holes in the cap. By rotating the pipe, the spray goes in different directions. I added a valve at the "clean" end of the pipe to shut off the water.
I did the same exact thing but drilled two 3/16" holes on the same side of the bottom fitting. The power from those little holes is amazing. I have my DW watch the level sensors and blast them clean.
Nothing cleans the tank like this method.
