AC/DC upgrade
I am upgrading the electrical in my Class C. I just installed an Ultra III 55 amp converter to replace the old Magnatek to get better battery charging. With the battery disconnected and plugged into s...
Forum Discussion
Thanks for the responses so far and help with the images.
Hopefully this will show up now. This is the photo of the panel I was referring to. The 10 gauge wire with voltage from the converter goes into the bottom of the relay socket on the right. I have no voltage at the large black (battery wires or the red wires at center.
Hopefully this will show up now. This is the photo of the panel I was referring to. The 10 gauge wire with voltage from the converter goes into the bottom of the relay socket on the right. I have no voltage at the large black (battery wires or the red wires at center.
Moderator note: You had the correct idea but you copied the URL incorrectly. I fixed the URL and now the picture shows. Hope this helps you out.
