Forum Discussion
gatorcq
Aug 20, 2017Explorer
why not do it yourself?
I just removed and replaced our sink and faucet set. Did this to in toilet and shower area.
If it is metal, reach under and see if there are metal studs. use a putty knife and slide under sink to break the seal.
During this time, it is good to add shutoff valves to the 1/2 pex lines. I used sharkbites, 3/8 to 1/2 lines.
If you do not want to do that, get 1/2 PVC plugs and screw into the end of the pex lines to prevent leaking while you replace the sink.
it is no different then working on a house - just smaller.
I just removed and replaced our sink and faucet set. Did this to in toilet and shower area.
If it is metal, reach under and see if there are metal studs. use a putty knife and slide under sink to break the seal.
During this time, it is good to add shutoff valves to the 1/2 pex lines. I used sharkbites, 3/8 to 1/2 lines.
If you do not want to do that, get 1/2 PVC plugs and screw into the end of the pex lines to prevent leaking while you replace the sink.
it is no different then working on a house - just smaller.
About DIY Maintenance
RV projects you can tackle on your own with a few friendly pointers.4,352 PostsLatest Activity: Jan 20, 2025