Brake,tail and signal light conversion to LED
I have a 2012 3500 silverado and pull a 14000 lb 5th wheel. I want to switch out the standard tail lights to LED. I'm sure you all have done this, any advise?
Forum Discussion
Those look like a good deal, do you have any yet? I'd like to know the actual size of the modules.
The description says "Modules are linked on 2-conductor 18AWG zip cord, 161mm (6.5") center-to-center spacing. 3.75" wire between each module." I'd like to know what marker lenses I can fit those behind.
I'd like to convert all my truck, camper, and trailer markers to LED (I've only done the tail lights so far) and I don't mind modifying my own stock lenses. Actually l like doing it that way, my camper tail lights are custom LEDs behind the stock lenses.
The description says "Modules are linked on 2-conductor 18AWG zip cord, 161mm (6.5") center-to-center spacing. 3.75" wire between each module." I'd like to know what marker lenses I can fit those behind.
I'd like to convert all my truck, camper, and trailer markers to LED (I've only done the tail lights so far) and I don't mind modifying my own stock lenses. Actually l like doing it that way, my camper tail lights are custom LEDs behind the stock lenses.
