Building my own batterty cables
I'm working on installing an inverter and new batteries in my RV and I needed new battery cables. I am using a TEMco Industrial TH0005 Crimper, which I really like. Here's how I built the cables
Forum Discussion
theoldwizard1 wrote:
Those TEMco crimper make very nice crimps, but the cheap hammer/anvil crimp tools are not bad.
Yep, I did the same thing too for my 1860 watt solar system for my truck camper almost a decade ago. Still running strong, too!
When at the race track and we didn't have a crimper, a fall back was using the expansion joint of a sidewalk/curb with a punch and 2 lb sledge. We also used parachute cord for determining the length of the cable by running the cord the route of the cable. Also, used painters tape to draw a line on the tape attached to the cable and lug to ensure the lug to match the orientation for the mounting of the lug to the eventual terminal.
Off topic link removed.
