Forum Discussion

Fxfymn's avatar
Fxfymn
Explorer
Sep 14, 2017

Converting a Magnetek 6300 to a Progressive Dynamics Unit

We have been pretty much living in our fiver every other month or so while we restore a house we bought in Charleston, SC. Upon returning to the trailer after about a month’s absence the battery was d...
ScottG's avatar
ScottG
Nomad
Sep 14, 2017
Nice write-up. BTDT!
One suggestion I have is when aconnecting the 12V output of the PDI to the old flock, wire it so it bypasses the reverse polarity fuses that the 6300 came with. The PDI has its own reverse polarity fuses so it would be redundant and the fuses in the old panel will also be too small to support the higher output of the PDI.

About DIY Maintenance

RV projects you can tackle on your own with a few friendly pointers.4,353 PostsLatest Activity: Feb 14, 2025