Forum Discussion

rwbradley's avatar
rwbradley
Explorer
Dec 31, 2014

DIY Fantastic Fan

I am curious on peoples thoughts on an idea that just came to me. I have a TT with a single ceiling vent in the bathroom, it has a basic switch operated fan with a standard MaxxAir covering it and the switch on the wall to turn it on and off.
I thought this could be an easy and free mod but am not sure if it would work. It occurred to me that the fan operates on DC and I have an old house thermostat (non digital that also operates on DC). I could mount the thermostat on the wall beside the switch and wire it inline after the switch, so that when the temp inside reaches whatever temp I set the thermostat to (say 90) the fan will automatically kick in. If I want to run it manually I can just side the AC temp all the way over to the end and the switch will operate manually.
Any thoughts or potential flaws with this idea???
  • the_bear_II's avatar
    the_bear_II
    Explorer
    Dec 31, 2014
    Never tried it but sounds like easy enough to test your theory by temporarily wiring it.

    Although it just occurred to me that the home thermostats operate on 24v using a transformer setup. But it's worth a try.
  • coolmom42's avatar
    coolmom42
    Explorer II
    Dec 31, 2014
    The thermostat wiring is probably not designed to handle the current load of the fan, wired the way you describe it. I would be very concerned about overheating the small thermostat wires, if you ever got it to work. Plus thermostats are designed to work on AC, not DC, and most are 24 V, not 12 V.
  • old_guy's avatar
    old_guy
    Explorer
    Dec 31, 2014
    why go through all that trouble when fantastic fans already come that way.
  • aamyotte's avatar
    aamyotte
    Explorer
    Dec 31, 2014
    You should add a relay to make the contact of the fan instead of running the power through the thermostat. This would prevent from frying the thermostat with the fan load.
  • crabbin_cabin's avatar
    crabbin_cabin
    Explorer II
    Dec 31, 2014
    Much simpler to buy the Fantastic Fan model that comes with a remote/thermostat!
  • rrupert's avatar
    rrupert
    Explorer
    Dec 31, 2014
    old guy wrote:
    why go through all that trouble when fantastic fans already come that way.


    I agree, just use the built in thermostat. You will just have to adjust it manually until you reach the desired setting.
  • RRoger's avatar
    RRoger
    Explorer
    Jan 05, 2015
    Easy to do, the secret is you need a relay. When the thermostat come ats close, it completes a circuit that actuates a bigger switch that can handle the current draw of the thing you want to energize.
  • travisc's avatar
    travisc
    Explorer
    Jan 05, 2015
    I actually did something similar- I had a basic fantastic fan on the overhead bunk ( class c)and decided I wanted to upgrade it- so I bought the upgraded model to install and then put the "guts" of the basic one in the bathroom- its nice setting one to push and one to pull to move fresh air through the rig.

    And I don't have a loud fan in the bathroom
  • CA_Traveler's avatar
    CA_Traveler
    Explorer III
    Jan 05, 2015
    old guy wrote:
    why go through all that trouble when fantastic fans already come that way.
    Plus they automatically open and close.
  • rwbradley's avatar
    rwbradley
    Explorer
    Jan 05, 2015
    To answer the questions about why bother... same reason you climb a mountain, it is there. It would be an interesting free (or almost free) Saturday project :)

    A relay makes sense... high school electronics is coming back to me now. I wonder if a Automotive Relay would work, it should be 12DCV? The real question is how much current the fan will draw.

About DIY Maintenance

RV projects you can tackle on your own with a few friendly pointers.4,351 PostsLatest Activity: Jan 13, 2025