Forum Discussion
Veebyes
Dec 06, 2016Explorer II
There is a method called roll & tip. Have a friend who did a 40' boat this way. Some years ago but think the paint was a 2 part epoxy applied with a very fine roller. Nothing like a professional spray job but not too bad. Can't remember type of paint.
No matter what is used or who does the job most of the work is in the prep. If you are planning on keeping the rig a long time think about using a marine paint like Awlgrip or Imron with a couple of clearcoats ontop.
Had a boat done with Awlgrip professionally. Five years later it looked just done. Not cheap.
No matter what is used or who does the job most of the work is in the prep. If you are planning on keeping the rig a long time think about using a marine paint like Awlgrip or Imron with a couple of clearcoats ontop.
Had a boat done with Awlgrip professionally. Five years later it looked just done. Not cheap.
About DIY Maintenance
RV projects you can tackle on your own with a few friendly pointers.4,360 PostsLatest Activity: Apr 13, 2025