Exterior speakers and selector switches
Hi all I'm in the process of adding outdoor speakers to my trailer and I need some help on how I should wire my speakers. I will have three zones in my set up, front, rear and outside. I want be abl...
Forum Discussion
sch911 wrote:
I can understand that you want outside speakers OK. A simple A/B speaker selector switch would allow you to add another pair into the system. But you say your outside speakers will have their own amp. So are we to assume your using the preamp outputs from the trailer's stereo head unit to feed this second amp? Neither option would require separate switches or light up switches.
The amps feed is coming from Pre amp (RCA) wires on the deck. My inside front and rear speakers are ran from my decks speaker wires.
I want the switches so that I can turn off each zone independly. For example, kids are sleeping in the trailer and we have their lullabies playing, I would lke to turn off my out side speakers to keep Bobbo happy. And if Bobbo is going to sleep and is all wound up because my 3 and 1 year old were to loud a 6:00 am I can turn on my outdoor speakers with the lullabies to help him go to sleep. I'm not ready for bed yet and know that the lullabies will put me to sleep so i turn of the front ( bed room) speakers to watch a movie. The reason for the lights on the switches is to know if the zone is turned on.
