Flat window vs curved wall (pictures)
I red a couple of threads about this issue, but in my case my fiberglass walls are slightly less curved then the "normal" OEM Ford van walls, Take a look at my pictures. I will be installing two...
Forum Discussion
Silicone would be OK in this application. It is an excellent sealant in compression between two surfaces, as long as the sun doth not shine on it.
I'm thinking the best thing would be a butyl rubber gasket, a thick one, and then seal edges on the outside with a urethane or polymer sealant. I like Geocel 2350, a close cousin to Geocel Proflex RV.
I'm thinking the best thing would be a butyl rubber gasket, a thick one, and then seal edges on the outside with a urethane or polymer sealant. I like Geocel 2350, a close cousin to Geocel Proflex RV.
