Holding tank fittings
Hi. I'm Doug, live in a very cold climate (high in the mountains), and am building a tiny house intended for year round living. I intend to install holding tanks in the heated space and can tolerate n...
Forum Discussion
As Chris Bryant states the glue will not break. ABS glue is also incredible easy to work with. Just coat both surfaces and stick them together with a slight twist. Be quick though as ABS glue is a lot like super glue in that is cures fast.
You coat both pieces with glue and have a few seconds to carefully position the parts near each other. But once the parts touch you only have about a second or two to give them a slight twist to spread the glue and then it's solid.
Here's an example of the coupler Chris was referring to. Link
You coat both pieces with glue and have a few seconds to carefully position the parts near each other. But once the parts touch you only have about a second or two to give them a slight twist to spread the glue and then it's solid.
Here's an example of the coupler Chris was referring to. Link
