Forum Discussion

popeyemth's avatar
popeyemth
Explorer
Feb 22, 2014

HomeMade fridge screen

Too cheap to buy the outrageous priced commercial screening I made and installed some myself


The "slobber" tube for condensate/defrost goes through a 3/4 copper sweat union.
The next time I'm in town I'll replace that with a piece of PVC to make it invisible to the casual eye.


It's not very noticeable now


I used aluminum window screening held in place with two sided tape and overlapped with "Gorilla " duct tape.
What little loss of flow I get will be offset by two 120mm fans thermostat controlled.

Moderator edit to re-size pictures to forum limit of 640px maximum width.

  • camperpaul's avatar
    camperpaul
    Explorer
    Feb 27, 2014
    John&Joey wrote:
    2oldman wrote:
    What's the mesh for on the outside, to the left of those 3 white things?

    :h

    Combustion Air intake and exhaust port for the furnace ...

    ... but there are a few water heater intake/exhaust combos that look like that.

    Here is a link to a larger picture. If you click it you will see a huge photo and you can scroll down and right to read the label.

About DIY Maintenance

RV projects you can tackle on your own with a few friendly pointers.4,351 PostsLatest Activity: Jan 13, 2025