Honda generator enclosure fan question
I am putting my Honda EU2000i in an aluminum truck type tool box on the rear of my Toyota. I would like to be able to run it with the box closed. I have most of it figured out, wiring, exhaust and s...
Forum Discussion
I am making some progress on this, I refrain from posting here as I have constant issues and often give up.
In order to make a seal between gen and separator wall I decided to order a sheet of Soundown online for $80.
I am still running experiments on temperature's and baffles it looks like I will be leaving fans as it keeps the generator temperature lower. I do not think the fans will survive the heat long term so will be redoing eventually.
I keep looking online for info on this mod and there is very little available.
In order to make a seal between gen and separator wall I decided to order a sheet of Soundown online for $80.
I am still running experiments on temperature's and baffles it looks like I will be leaving fans as it keeps the generator temperature lower. I do not think the fans will survive the heat long term so will be redoing eventually.
I keep looking online for info on this mod and there is very little available.
