Forum Discussion

Minerrick's avatar
Minerrick
Explorer
Sep 07, 2020

I'm installing rigid insulation on the underbody.....

....of my 2002 Arctic Fox 24.5N FW and I have some questions: When I took the old coroplast off, the bottom of the holding tanks were sagging downward a little, thus causing the coroplast to sag downw...
JoeH's avatar
JoeH
Explorer III
Sep 14, 2020
dpglifestyle wrote:
As far as the bulge from the tank you can run a steel strap from frame rail to frame rail under the tank. Install with an empty tank, pull tight and screw to the frame. A lot of units come this way.


I would put a strip of old inner tube rubber or similar material to cushion the plastic tank from the steel.

About DIY Maintenance

RV projects you can tackle on your own with a few friendly pointers.4,371 PostsLatest Activity: May 20, 2025