Installing an Elec. Tounge Jack?
Purchased an Ultra Fab 3002 to add to the trailer this season. I had figured they installation would be pretty easy, remove a few bolts, pull the hand crank jack, puth te new jack in place, put the b...
Forum Discussion
The instructions for my Barker pointed out that one of the 3 bolt holes uses a toothed washer, to bite into the metal on both the jack and the frame, ensuring a good ground. They recommended sanding the frame where that wash makes contact.
Also, your mileage with that fuse may vary, but if your luck is like mine, the fuse will burn out at the least opportune time. After failing to find a replacement 30 amp time-delay glass fuse, I got tired of hand cranking my electric jack. I cut out the fuse holder and replaced it with a waterproof marine grade circuit breaker.
Cooper-Bussman 30 amp waterproof
Also, your mileage with that fuse may vary, but if your luck is like mine, the fuse will burn out at the least opportune time. After failing to find a replacement 30 amp time-delay glass fuse, I got tired of hand cranking my electric jack. I cut out the fuse holder and replaced it with a waterproof marine grade circuit breaker.
Cooper-Bussman 30 amp waterproof
