pg_rider wrote:
Thanks for the tips! I have the factory bedliner so do you think I should factor in an eigth-inch or so into the measurements?
1/8" to 1/4" I would say, the liner goes on thick and can be thicker in one area over another based on my experience. They provide you with a template for the holes, I measured from the front and back to make sure everything was a square as possible. The holes you drill for the pins that come thru the bed are considerably larger than the pins so don't sweat it.
I also hit the holes thru the bed with a can of spray on bed liner to make sure I didnt have rust issues in the future with the bare metal exposed. You can get that at Home Depot or Lowes or Autozone type store.
