Introduction and New Project
Have lurked on the forum and lots of great info here...appreciate the wealth of knowledge as it's helping me through this project. Our '01 Kit Espre surprised me with a rotten rear floor I discovered...
Forum Discussion
A bit more progress. Under body "wrap" patched and reinforced along all edges, rear sill is in with a 2x4 brace for additional support and the rear studs are spliced and in. Now for the corner studs, insulation, reconnect wiring and close the rear wall back up. To thif point the work is turning out to be sturdier than when I bought the camper. Hoping it stays that way. I'd encourage anyone to chime in and if you see that I'm headed down the wrong path with part of this project please let me know. I'm learning as I go.
