Just a thought.
I've been wondering and it doesn't mean that I would do it, but wouldn't it be nice to have access under the dinette seat from the outside instead of having to remove the cushions each time? I have a ...
Forum Discussion
RayJay3 wrote:
I installed drawers under both seat cushions in a Cougar I had. Used full length drawers slides to be able to pull drawers out completely. I had to build a frame to attach the slides to.
You can get a bracket to attach the end of a drawer slide to - as in photo. You'll find these used by RV manufacturers because it's easier (read, "cheaper") to install slides as you don't have to monkey around with side pieces and getting them aligned.
I bought those brackets for adding drawers to the cubby holes either side of our bed but could not reach the ends because my arms weren't long enough to reach into the depth of the 28" slides. Easy access to dinette seating in comparison. Adding side pieces can be a total PITA because there's almost nothing plumb, level, square or straight in a TT or similar RV. Needs a lot of shimming and fiddling to get aligned because the required tolerance is only 1/16" side-side. The end brackets save weight too.
