led light strip
Has anyone installed a led light strip under awning on motorhome? How far down did you install and how? Looks like we have to drill approx. 1/2 in hole in side of camper to get wire through it. Kind o...
Forum Discussion
similar to these guys I mounted mine 2" under the awning attached with outdoor mounting tape. I used 1" tape but had to cut it down..half inch or 3/4" would've been better. I bought extra wire (Extra wire) then used white conduit (wire conduit) ran down next to the awning and into the basement area. I took power off of one of my basement lights so it would act just like the basement light whether hooked to shore power or on battery. Not nearly as difficult as you would think it is to do. I took my time and made sure the install looked professional and it does. I would recommend you search around and find an RF remote for the lights instead of IR remote. RF doesn't have to be line of sight like IR so you can mount it inside the camper out of sight. I found my kit on ebay for about $30 (RF LED kit) and it came with 2 rolls of lights even though I just used 1.
