Multidirectional Winch Mount on Spare Drawbar
We had to solve a tricky problem -- pulling our little trailer up onto our short driveway at a 45 degree angle into a tight space, with no way to pull it up with the truck hitch. After a lot of trial...
Forum Discussion
Very creative solution, impressive.
Wihtout knowing the size of the load, be aware that in this setup the bolt at the pulley point and all the bolts on the winch setup are being tested by their shear strength, not tensile, since force is being pallied on its axis.
I'd consider a large eye hook for the pulley point and not using the seam in the driver. Small points though, well done.
Wihtout knowing the size of the load, be aware that in this setup the bolt at the pulley point and all the bolts on the winch setup are being tested by their shear strength, not tensile, since force is being pallied on its axis.
I'd consider a large eye hook for the pulley point and not using the seam in the driver. Small points though, well done.
