My latest Mod
Our outside night light was blocked when we opened the door, so it was hard to see the steps.. I put a marker light on the frame behind the steps, so now they are very well light,, I also put an LED b...
Forum Discussion
jimgoss wrote:actually it was very easy to run the wire,, the converter is in the cabinet below where I put the switch, the main harness ran thru the floor right there, took a couple of the screws that hold the underbelly on and was able to feed the wire right thru that, I did put a small piece of hose around the wire where it passed under the frame. I wanted to wire mine into the same switch that turns on the reg outside light, but would have been a real pain to do that.
Was it a pain to run the wiring? I would love to install a step light like that too but am leary about drilling thru the underbelly.
