My LED Strip Install
After seeing many new trailers at the RV Show with LED strips mounted under their awnings, we decided that we should add one to ours. I then discovered the many threads here on RV.net regarding these...
Forum Discussion
GordonThree wrote:
got my strip from LEDENET today, defective :(
the green string is very weak, blue and white don't work at all, tested with a 13.4 volt power supply. red works fine. the driver seems OK, I connected a 12v LED work light to each channel and they all worked ok.
returning it to Amazon tomorrow, and I'm gun shy about ordering another string from LEDENET, I will have to check on e-bay and see what my options are.
DanKirk, in your first pic, you have both the white and color working at the same time. What button combination did you press to get there? When I turn white on, by long-press of the "-" button, I can dim/brighten it, but as soon as I hit the color wheel, white turns off.
edit: update! looks like I was sent a 24v string instead of a 12v string... dialed the psu up to 24v and sure enough, works fine. so still sending this back, but will order up another string for the heck of it.
Did you get the functions figured out? Touching the color wheel will take you back to Mode 1, which is whatever color is selected on the wheel. The other modes are selected by pressing the + mode button.
