PD4655 converter question
I am going to replace my main board assembly of my WFCO 8955 converter with a Progressive Dynamics PD4655 assembly. I know that the PD unit will come with a new 12 volt fuse block assembly, but is it...
Forum Discussion
I replaced my Magnejunk with a PD4655.
It is NOT necessary to replace the 12v fuse board. It is true that the board has the charge wizard controller, but you can get around that.
Here is a link from www.bestconverter.com to a PDF that tells how to modify a charge wizard pendant to work with the PD4600 series.
http://www.bestconverter.com/assets/images/Progressive_Dynamics/PD92201_for_PD4600.pdf
That being said, I recommend replacing the board, but it is not necessary. I did replace my board.
It is NOT necessary to replace the 12v fuse board. It is true that the board has the charge wizard controller, but you can get around that.
Here is a link from www.bestconverter.com to a PDF that tells how to modify a charge wizard pendant to work with the PD4600 series.
http://www.bestconverter.com/assets/images/Progressive_Dynamics/PD92201_for_PD4600.pdf
That being said, I recommend replacing the board, but it is not necessary. I did replace my board.
