Remodel insulation

closed cell is absolutly worth it if you can find some one who will spray a rv.  second best would be a good high r value ridgid foam board that you cut a little smaller then use expanding door and window spray foam to seal it around all edges. 

the thing with spray foam is if they spray it properly it is going to bond to the surface and lock everything togeather increasing the strenght of your wall or celing system, but at the same time it will make it harder for repairs.  the second benifit of it is you know it makes an absolute seal keeping any migration of heat due to air flow out.  you can achieve that with foam board but it takes diligent sealing with the expanding foam.  

last thing is ya it might be a bit more expensive but it is easier fo you in the long run.  it conforms to shapes, goes over wires, and plumbing.  foam board thoes areas will take the most time.  if you have it in a drivable state, when you ask spray foam companies for a price tell them your willing to drive it to a location where they are already spraying if there is one close.  that will save you a ton of fees as there is a minimum setup and tear down just for them to start a job.  if they could sneak it in at the end or begining or lunch hour where they are already shooting, it might sace you a whole bunch of money.