RV aluminum siding gauge?
The overcab in my 94 Toyota class C is rotted, cannot put off repair much longer. Been reading about this, I would like to use a 4X8 sheet of aluminum and eliminate the front window. I would pre...
Forum Discussion
jjrbus wrote:These alloys also come dead soft with a SO designation. I would use what ever is available and is affordable, the softer the temper the thicker you should go. Airstream makes their Al trailers similar to Al airframes.
Thanks for the responses.
Adding stringers is a good idea, there is almost no framing in that area except along the edge.
I need to also keep in mind what is available locally. From what I am reading 3003 may be a good option? It is med strength and is cold workable. I'm thinking around .032
I probably use prefineshed white so I can paint it at some point.
Recently came across 2024 T3 .032 which appears to be what Air Stream trailers use, so need to look into that. I should start this in the next month or so.
