Forum Discussion
TheWB
Nov 01, 2015Explorer
And complete! Here are the remaining steps I took.
Figured I'd try the easy way first and tie to the battery at the distro box. If it works, great. If not, won't be too much more work to run it out the bottom and over to the batteries. May still end up doing that later just because. But this is how the Lance instructions for their camper hookup works. I had emailed them asking for schematics on how they did it at the factory and they emailed them to me. Great help those folks!
Hooked them all up to the control module.
Close up of the face.
Everything put back. Fired up, and charging the batteries. Good deal. Will test it out this weekend and report back.
Celebratory smoke and drink...
Figured I'd try the easy way first and tie to the battery at the distro box. If it works, great. If not, won't be too much more work to run it out the bottom and over to the batteries. May still end up doing that later just because. But this is how the Lance instructions for their camper hookup works. I had emailed them asking for schematics on how they did it at the factory and they emailed them to me. Great help those folks!
Hooked them all up to the control module.
Close up of the face.
Everything put back. Fired up, and charging the batteries. Good deal. Will test it out this weekend and report back.
Celebratory smoke and drink...
About DIY Maintenance
RV projects you can tackle on your own with a few friendly pointers.4,352 PostsLatest Activity: Jan 20, 2025