The dreaded plastic hot water plug/my fix
I see where people here have problems with their plastic hot water plug. Here is how I fixed mine. I used this for 9 years on my TT and now for 4 years on my MH so it has been well tested, never had a...
Forum Discussion
Same as the above post, I bought a gas line shut off valve. Used a double male pipe thread fitting to install it to the drain of the water heater. To keep the water from running down the side of the trailer, or pooling in the panel box, I carry a six inch length of brass pipe and just finger tight thread it into the shut off valve.
I've used this method on five trailers so far and never had a problem.
Bandaid
I've used this method on five trailers so far and never had a problem.
Bandaid
