Forum Discussion
pianotuna
Sep 13, 2015Nomad III
Hi,
If you use a pwm controller with a 24 volt panel, essentially you are cutting the solar harvest by around 50%. That makes it a bad deal.
Either find a nominal 12 volt panel (which may often be 17 volts) or use an MPPT controller.
The exception to the above is if you wire the batteries to be 24 volts. But that won't work well with a 24 volt panel--it would need to be about a 30 volt panel.
If you use a pwm controller with a 24 volt panel, essentially you are cutting the solar harvest by around 50%. That makes it a bad deal.
Either find a nominal 12 volt panel (which may often be 17 volts) or use an MPPT controller.
The exception to the above is if you wire the batteries to be 24 volts. But that won't work well with a 24 volt panel--it would need to be about a 30 volt panel.
About DIY Maintenance
RV projects you can tackle on your own with a few friendly pointers.4,394 PostsLatest Activity: Oct 06, 2025