Forum Discussion
DirtyOil
May 11, 2016Explorer
rhagfo wrote:
Well some of my concerns were confirmed just the other day. Camper came into the park with an Andersen Ultimate Aluminum, first issue the cable for the release lock, was pushed and bent at the adapter end, and you couldn't pull the release, until I straightened the cable. I am not sure how it got bent. Second is I noticed this was the persons first tow with the setup and the spray in bed liner was already scared by the base, looked like slight movement fore and aft.
That and one single bolt secures the Andersen to the ball adapter!
B&W uses a hold down bolt, and two "U" bolts to secure to the ball adapter.
My spray liner does not show any scares, flattening or any "ridges" from the Anderson frame. If properly installed that won't happen. Been using the Anderson for 3 years now.
About Fifth Wheel Group
19,031 PostsLatest Activity: Dec 16, 2025