navspecwarops wrote:
OK, I'm ready to install the Condor Trailer Only Chock. I've reread the entire thread and seen a lot of the photos. Last question regarding positioning. I'm thinking the front of the chock should have some clearance from the kitchen/pass through wall of say about one inch as bikes can flex the front stop just a bit when dropped into the chock. The photos I've seen "look" like the chock is right up against the wall where I'm thinking it might flex the wall in if this should happen. What do you think, Gents??
I'm centered between d-rings and my chock is 1 inch back from shelf wall. With the Ultra & tourpak I wanted enough room at the rear door to get around the bike when hauling.

[/img]