Auto level question
When you are in auto level position, all jacks are down, what is your steps to get trailer on the hitch? Specifically, what do you do to get the back 4 jacks up?
Forum Discussion
Super_Dave wrote:
I talked to a couple different people in the campground this morning and got different responses as to how they handled it. It made me curious if there were any other ways folks were handling this. Hitch height button only works when the front jacks are the only ones down.
Hitch height works when all the jacks are down. It raises the 4 rear jacks then sets the fronts to the last height when you unhooked. If you hit hitch height when the rears are up and the fronts are already at hitch height it will give you an error.
But the main question is about like asking the length of a piece of rope. Lots of ways to hook/unhook based on whatever system your FW has.
