Before I purchase a new converter....
Getting ready to replace my old Magnetek model 940 with a Powermax Pm3-35. I cleaned all around the old converter, still installed, and realized there are no wire connectors on the side of the Magnete...
Forum Discussion
So trying to do dishes tonite, i turned on a few lights and the flashing got much worse. Almost to the point of me getting a little nausious!
So, i shut down shore power, disconnected the batteries, then disconnected and reconnected the hot/neg/gnd wires. Reconnected the battery, which read 10.3 disconnected, turned shore power back on, and voila! 14.5 volts and no flickering. Lets see how long it will last....
So, i shut down shore power, disconnected the batteries, then disconnected and reconnected the hot/neg/gnd wires. Reconnected the battery, which read 10.3 disconnected, turned shore power back on, and voila! 14.5 volts and no flickering. Lets see how long it will last....
