Before I purchase a new converter....
Getting ready to replace my old Magnetek model 940 with a Powermax Pm3-35. I cleaned all around the old converter, still installed, and realized there are no wire connectors on the side of the Magnete...
Forum Discussion
OK and your post said hot, neutral, ground.
Don't know if it was 120vac or 12vdc connection but it seems something was loose.
Loose connection somewhere seems far more likely than a flickering converter defect. Usually a converter is just dead, not intermittent as described.
Don't know if it was 120vac or 12vdc connection but it seems something was loose.
Loose connection somewhere seems far more likely than a flickering converter defect. Usually a converter is just dead, not intermittent as described.
