Before I purchase a new converter....
Getting ready to replace my old Magnetek model 940 with a Powermax Pm3-35. I cleaned all around the old converter, still installed, and realized there are no wire connectors on the side of the Magnete...
Forum Discussion
BTW at 10.3 volts those batteries need to be charged asap. Get something on them besides this converter. And monitor how that goes also. 10 volt battery is always suspect of a shorted cell.
And yes the converter can be run with or without a load and should still produce the proper voltage profile.
And yes the converter can be run with or without a load and should still produce the proper voltage profile.
