Boat behind 5th wheel

With the ATVs, at the top of the infamous "Ike Gauntlet".

With the old truck. Went from Colorado to Glacier NP this trip.

Thousands of miles with this.

With my Malibu.

I have done it for years. Everything from a really light 12' aluminum fishing boat, a tandem utility trailer hauling quads, a 16' Lund fishing boat, a 21' Crownline sterndrive (5500 pounds), but reached my limit with my current boat, a 23' Malibu 23LSV (6500 pounds).

Never used a rear view camera. Would be nice, but I don't think it is vital.

I will say the more tongue weight you have, the worse the ride in your truck is going to be. I still have my 16' Lund, and pull it without thinking twice.

I tow my PWC behind the 5th, yes I use a camera as there is no other way to see it.

I tow a 19' Baja behind my 27' Keystone FW. Just have to make sure not to pull in somewhere you cant drive thru, since backing up is pretty much impossible. I had a welder friend fab my receiver hitch and I bolted it thru the frame with 10 bolts. I get people staring at my setup but law enforcement here in Kansas has never stopped me in 10 or so years with this contraption.

Interested in the same idea but towing a golf cart.
Someone said to weld the hitch rather than bolting it on.
Just wondering about the advantage of welding.
Seems like putting holes in the frame could be less stressful than heating it with a weld. What are the pro and con's to each method?

We pulled a 15 foot aluminum boat for years behind 2 different travel trailers . We would tie a PVC pipe with red rags on the back of the boat so we could see the flags in the mirrors. Then later we would take this old Ouachita tri hull with us behind our fifth wheel. We never had any issues and actually did not really notice much more strain on the truck. These days if I were to do it again I would get a wireless camera to keep an eye on things .

We have towed boats behind our FWs since 1993, when we bought our first FW. Boats ranged from a 19', very light, Byliner Capri to a 22' Sea Hunt Escape Dual Console Salt Water fishing boat whose weight on the wheels, while hooked to the FW, was 5,000 pounds. No problems and have been lucky enough to have not gotten in a position where we had to back up with all three items. I could turn around in a road if it was wide enough but have not driven on a road that wide. Our current sit-up is a Jayco SuperLite 26.5 RLS that is approximately 30' long from hitch to back of bumper and we hitch a Crestliner Super Hawk 1900 behind it and go camping and fishing. We do this at least three times each year when going to Grand Teton National Park, stay at Colter Bay campground and fish Jackson Lake. Needless to say, don't use a bolt-on hitch, go to a professional welder and have a hitch welded on to the FW and, if necessary, have them reinforce the frames toward the axles.