Broke Our SuperGlider
Well I managed to bend the locking mechanism on our 2700 PullRite superGlider on only our 2nd tow. Went thru all the pre-checks before backing under the King pin to latch, backed up got it latched, pu...
Forum Discussion
When hitching I set the kingpin just slightly below the level of the hitch plate and let it ride up. About 1/8" below. When unhitching I raise the trailer until I just barely see a gap, maybe 1/16". Never a problem.
When I first got my hitch and 5'er I raised until I saw the kingpin begin to slide slightly on the hitch as the weight is unloaded. Maybe 1/4" below where I'd see a gap. This always caused me problems with it not releasing easily. With a very small gap it glides out every time.
When I first got my hitch and 5'er I raised until I saw the kingpin begin to slide slightly on the hitch as the weight is unloaded. Maybe 1/4" below where I'd see a gap. This always caused me problems with it not releasing easily. With a very small gap it glides out every time.
