Cameo Slides - Gear skipping
I have a 2008 Carriage Cameo F35KS3. On the main (non-kitchen) slide the motor starts to skip once a bit of resistance comes into play. It happens on both extend and retract. The motor shaft gear does...
Forum Discussion
On our '09 Cameo, the motor gear stripped because only 1/2 of it was engaging the rack. A new gear can be bought from Coachworks for about $150. Well, I am a welder so in my shop with my MIG welder I built the teeth up, ground and filed then turned it on the lathe to 100thous. oversize.
Finished by flipping the bronze bushing near the motor to flange forward and rearranging the spacers so that it fully engaged the rack. Door side went also.
Look at my old posts. PM me Max
Finished by flipping the bronze bushing near the motor to flange forward and rearranging the spacers so that it fully engaged the rack. Door side went also.
Look at my old posts. PM me Max
