Clearance problems
I have a 2014 GMC Sierra 2500 4x4 and 33’ trailer. I have right at 6.5 inches of clearance between the top of the truck bed rails and the bottom of the trailer. The trailer is riding nose high (not to...
Forum Discussion
buck n duck wrote:
My axles are already below the springs. It came from the factory that way. My stabilizers/jacks are electric automatic leveling and are placed right behind my rear tires.
I'm in the same boat, especially after the town where I store my rig allowed the new street going in to be about 2' higher than the old dirt road. Now, we've got that 2' drop in about 12' to our gate. I have about 3" clearance as I drop down into our yard. I =did= have someone watch the first time I went in and I was good to go. I was a lot more worried about our 30' 3-axle flatbed GN trailer going in and out and, even with a 7k lb tractor on the trailer, we had plenty of clearance. Double-check that you don't have any extra holes in the spring hangers where you could drop the springs down a bit.
Lyle
