Damaged 5er hitch by backing too hard
I've been hitching up for many years with no problem until this summer. The hitch head is supposed to be a little higher than the kingpin. But this time, it must have been several inches higher. As ...
Forum Discussion
JRscooby wrote:
Back decades ago, my Dad had clip mounted to a magnet and a beaded chain like we used to turn on lights.
Unhook, pull the truck out. Before adjust to level hang the chain so end is just above ground with magnet in same spot. Ready to hook up, put magnet back in place, work the jack until chain just touch ground. Unless 5th wheel is way down in front, no issues with lifting trailer, mash truck down less than half inch if at all.
I don't know about pickups with air bags, but with trucks we sometimes have issues pulling out from under a trailer w/o dumping suspension. Unloading, the frame comes up faster than leveling valve can adjust. Top of bed could get ugly.
That's a great method! If only after all these years I would remember to set that system up.
