Do you grease or lubricate the jack legs?
Does anyone grease the 5th wheel jack legs? Not the outside but the screw portion inside the legs which are doing the work lifting the trailer? If so, how?
Forum Discussion
There's no way an external zerk will be able to put grease on the inner screw. Ditto with any spray, unless your remove the stabilizer foot and use a very long straw.
About the only way to lube the inner screw is to disassemble the leg and grease it by hand. I greased my Bulldog legs up before I installed them and you can't access the inner screw unless you run the inner leg all the way down.
About the only way to lube the inner screw is to disassemble the leg and grease it by hand. I greased my Bulldog legs up before I installed them and you can't access the inner screw unless you run the inner leg all the way down.
