Dometic 320 has weak flush using Water Pump
I replaced my Dometic 300 all plastic toilet with the Dometic 320 without the spray wand. The old toilet flushed fine using the 12v pump. There was plenty of pressure but the seat made so much popping...
Forum Discussion
I'll have to take another look for where the pump is to get the make/model info. It's not mounted in the obvious locations so likely behind the panel in the pass through. the weak water flow is in the front of the bowl. The water flows better in the back of the bowl. The shower has plenty of water pressure as do all other faucets other than the outside shower. They notoriously have poor pressure anyway. Like I said, on a city water hookup without regulation, everything works fine. I don't know the amount of pressure though. Likely not a blockage in the water line. I'll report back when I have more info to provide.
