Eclipse Attitude Frame Cracking
Found these on my 2015 28SAG. Cracks are running horizontally and are ~10-12" on each side between the wheels. I have sent an email to Eclipse to get their take. Here is looking from the outside ...
Forum Discussion
Lipperts Engineers - Should be fired and sued
Lipperts Welders - Should be fired
I had to take some measurements on my frame to check Camber prior to it going back to the factory. I had to fabricate some brackets to attach to my frame out of angle iron then run a string line front to back and measure for twist and bow of the frame. The pictures I sent Lippert were priceless. My welds on my brackets were nice and it was right next to their factory weld that looked like some bubble gum painted black. I added in my text of the email for them to study my weld in the picture and teach it to their welders at the shop. Never got a response back from it...kinda scary as it went back to the factory for work.
Lipperts Welders - Should be fired
I had to take some measurements on my frame to check Camber prior to it going back to the factory. I had to fabricate some brackets to attach to my frame out of angle iron then run a string line front to back and measure for twist and bow of the frame. The pictures I sent Lippert were priceless. My welds on my brackets were nice and it was right next to their factory weld that looked like some bubble gum painted black. I added in my text of the email for them to study my weld in the picture and teach it to their welders at the shop. Never got a response back from it...kinda scary as it went back to the factory for work.
