Electric brakes settings
Just courious, what setting do you'll use on the brake control. I have an 2012 Dodge and it came with built in brake controller. thanks
Forum Discussion
gcloss wrote:
I just bought my 2012 Ram 2500 last month with the factory brake controller. My trailer is probably about 6500 pounds. I set the controller to heavy and found the gain at 3.5 to be good slower driving. On the highway I have it between 5 to 6.
This past weekend was my first trip with the new truck. Truthfully I wasn't a bit impressed with the factory controller. I'm glad I saved my Prodigy P2 & cable from my old Ram. IMHO the Prodigy P2 is a far better controller than the factory installed controller.
I know someday soon, I will be finding a way to abandon the the factory controller and install the Prodigy.
If you haven't already gone to http://www.cumminsforum.com/forum/
There are several guys that have replaced their TBC with an aftermarket one and explained how to do it and remove the warnings from the EVIC. Pretty simple, I wish I could remember.
