Equal bearing for both sides of landing gear?
My first 5th wheel had separate controls for the landing gear so this was never an issue but my new one is just one switch. How concerned do I need to be about getting both sides of the landing gear ...
Forum Discussion
If you have hydraulic jacks, they are self-equalizing. That is, if both front jacks (landing gear) are on the same hydraulic circuit, they will each carry the same weight as the hydraulic pressure is the same in both of the jack cylinders. One may or may not touch the ground first, but note that it will immediately stop until the other jack is grounded, then both will extend.
Rusty
Rusty
