Equal bearing for both sides of landing gear?
My first 5th wheel had separate controls for the landing gear so this was never an issue but my new one is just one switch. How concerned do I need to be about getting both sides of the landing gear ...
Forum Discussion
My driveway is not level side-to-side so I went to CW and got the adjustable (screw in/out to adjust) feet for the landing gear on my old 5er. I would pull the pin until the foot is about 1" from wood on ground, then adjust each leg accordingly and then run them down with the powered switch. Worked perfectly.
http://www.campingworld.com/shopping/item/ultra-adjustable-footpad/61529
http://www.campingworld.com/shopping/item/ultra-adjustable-footpad/61529
