dedmiston wrote:
Riddler6.7 wrote:
That has come to bite me now! The auto leveling is not working correctly. I have tried setting the zero, but that did not fix it. Everytime you let it attempt to auto level, when it comes time to level side to side, it just raises the right side up all the way and then gives an error. It does it everytime. So I can only use the manual mode right now. That is the biggest issue.
My 6-point system did the same thing when we first got ours. It turned out that the left and right hydraulic lines were switched, so its mind was blown when it tried to level itself.
Here's how you can test for that. Press forward (or up arrow) and the nose should go up. Press backward and the tail should go up. Press left and the left side should go up. Press right and the right side should go up.
If any of the buttons do the opposite of what you expected, then the lines are reversed.
Thanks for your input. That was one of the first things I tried. But the good news is I did get it figured out this morning. "They" installed the rear sensor backwards, so it was thinking it was leaning the opposite way. Luckily it was easily accessible and I got it flipped around. Tested it out, all is well.