Finally building an RV Garage at the house
Very excited to say after talking about it for a long time, we finally pulled the trigger a few weeks ago on a workshop with attached RV garage. The slab was poured before Christmas and then the weath...
Forum Discussion
When my new truck wouldn't fit:
1. Assuming there is adequate ceiling height
2. Removed 2" header at top of door.
3. Trimmed with thin pastic fascia
4. Tacked 2" board to top of door
5. In goes truck
Assumes door is high enough when open to clear
1. Assuming there is adequate ceiling height
2. Removed 2" header at top of door.
3. Trimmed with thin pastic fascia
4. Tacked 2" board to top of door
5. In goes truck
Assumes door is high enough when open to clear
